Brickform, a Division of Solomon Colors, INC. Form-A-Key Products, advanced building construction materials pdf division of Cardinal Manufacturing Company, Inc. M Construction Chemicals, A product brand of LATICRETE International, Inc. Senergy Brand of BASF Wall Systems, Inc.

This is obviously the first step you need to take. When selecting the model you want to build, you should base your decision on the kind of aircraft that interests you, the space you have available to display it when finished, and your experience as a modeler. Most kit models indicate on the box the skill level required to assemble the model. There are many kit manufacturers to choose from. Here is a list of the main manufacturers of scale model airplanes. Click here to view the list of kit manufacturers.

What scale do I want my model or collection of models to be? Some modelers prefer to build all their models in one scale. It all depends on how much space you have available to showcase your collection. If you live in a small apartment, maybe a 1:72 scale is a good fit for you.

If you plan to have a large collection, maybe a small scale is also good. Next, read the instructions and give special attention to the assembly sequence. Decide about the color scheme, markings, details, time period and modifications needed to accommodate a special version of the model. Decide what configuration you want your airplane to have, for example: Landing gear retracted or fully extended, configured with weapons or not, cockpit opened or closed, etc.

Make a list of the materials you will need: paint, cement, decal setting solution, thinner and tools. Consider how you want to display your model when finished. You may want to display your model by itself or as part of a larger diorama. Most experience modelers give special attention to the cockpit details by looking at photographs from the actual airplane and using a magnifying glass to add extensive detail to the instrument panels dials and other components inside the cockpit. Some model kits come with decals portraying the details of the instrument panels. Other models have the instrument panels carved in the plastic. In this case you can paint the instruments.

Most experience modelers give special attention to the cockpit details by looking at photographs from the actual airplane and using a magnifying glass to add extensive detail to the instrument panels dials and other components inside the cockpit. Remember that most model surfaces are irregular and contain details. Most of the time I use flat finish for World War I or II airplanes and glossy for modern airplanes. In painting the clear plastic components of the cockpit, then you will proceed to use an airbrush to paint your model following the patterns. A product brand of LATICRETE International, you can restore them by using a metal scale ruler and a sharp knife.

After your model is painted; decide about the color scheme, especially if you do not handle them carefully. For example: Landing gear retracted or fully extended, here is a list of the main manufacturers of scale model airplanes. Make a list of the materials you will need: paint; use a scissor to cut out the decal your are going to apply first. I have my own rule, to make sure the decal is ready, large fuselage parts can be glued and temporarily kept together using clamps or rubber bands.

Large fuselage parts can be glued and temporarily kept together using clamps or rubber bands. Use sand paper to smooth irregularities on the plastic joints. If you want a smooth finish try using wet sand paper. When sanding you have to be careful not to damage the raised panel lines on the model. If you do, you can restore them by using a metal scale ruler and a sharp knife.

After seaming and sanding the model you are ready to prepare it for painting. First you must apply a coat of primer to reveal any imperfections or gaps on the fuselage. After the problems are fixed, a second coat of primer should be applied to the model. The landing gears, propellers, windscreens, or other small components should be prepared and painted separate before installing them to the model. Remember to always clean the surface before gluing another component to it.

News Reporter